Close
Shopping Cart
Your Cart is Empty

Miracle Seal-Pro

The Number 1 Choice of Architects, Homeowners, Engineers, and Building Contractors

Contact us for more information about our nontoxic sealant.

☎ 980-613-3800


Products

Miracle Cover Water-Based Waterproofing Sealant is a professional, penetrating weatherproofing treatment, utilizing manufactured Silicone Rubber. Our Silicone Rubber has been tested in actual use in all climates for over 40 years showing NO deterioration from ultraviolet rays, ozone, salt spray, acid rain, etc. Also it has been tested in accelerated weathering machines which show NO breakdown at over 100 years. This is a ONE coat water-sealant which not only saves material cost, but saves the labor cost as well.


Our Silicone Rubber gives a 400% elongation which allows expansion and contraction, building movement, temperature extremes, etc. The product has a very high perm-rate (this allows moisture-vapor to escape while not allowing liquid to enter the surface).

Miracle Cover has material flexibility after curing which allows for expansion and contraction, building movement, and temperature extremes from ( -70 to + 400 degrees Fahrenheit)

PRODUCT DESCRIPTION:

A. Water and Liquid Repellent - Miracle Cover is a one component white liquid with silicone rubber dispersion which, when applied according to specifications, seals porous surfaces making them resistant to penetration by water and other liquids with little or no change in color or appearance.

B. Extra Strength - Miracle Cover in extra strength "Miracle Cover Marine" and "Graffiti Guard" form fills voids in porous surfaces and minimizes the penetration and attachment of barnacles, moss, and oils from marine vessels as well as the penetration of graffiti. Thus allowing the removal of graffiti with an approved cleaner and low pressure water rinse without sacrificing the anti-graffiti barrier. High pressure washing may be used for removal but will reduce the life expectancy of Miracle Cover's water repellence and anti-graffiti barrier.

C. Miracle Cover has material flexibility after curing which allows for expansion and contraction, building movement, and temperature extremes from (-70 to + 400 degrees Fahrenheit).

Miracle Cover ™: Marine

MIRACLE COVER MARINE is a water based, two coat silicone rubber solution. When properly applied, it seals porous surfaces making them resistant to penetration by water or other liquids while allowing air to permeate the coating. MIRACLE COVER MARINE saves not only material cost but labor cost as well.


There is no need for maintenance or seasonal re coats that are typically required with other conventional water repellents. Two applications of MIRACLE COVER MARINE will substantially prolong the life, beauty, and usefulness of any surface and it is guaranteed to last five years. 

Now boat owners can have long lasting protection from destruction by water, algae, barnacles, moss, rust, oils, and ultraviolet rays. The value of your boat demands the protection of MIRACLE COVER MARINE. It is easy to apply. You can do it yourself or have your boat yard do it at your next maintenance period. MIRACLE COVER MARINE is now available in quart, gallon, 5-gallon, and 55-gallon units.

Miracle Cover ™: Marine

Product Descriptions:

1 Quart - $40.00

Miracle Cover ™: Marine
$40.00
Add to Cart

Product Descriptions:
1 Gallon - $140.00

Miracle Cover ™: Marine
$140.00
Add to Cart

Product Descriptions:
5 Gallons - $500.00

Miracle Cover ™: Marine
$500.00
Add to Cart

Product Descriptions:
55 Gallons - $6,300.00

Miracle Cover ™: Marine
$6,300.00
Add to Cart

Miracle Concrete Color ™

2 Oz Can

Cedar, Grey, Nutmeg
$7.99
Add to Cart
Charcoal, Mahogany
$8.99
Add to Cart
Ginger, Redwood
$11.59
Add to Cart
Crimson
$15.99
Add to Cart

Quarts

Cedar, Grey, Nutmeg
$99.95
Add to Cart
Charcoal, Mahogany
$116.00
Add to Cart
Ginger, Redwood
$162.00
Add to Cart
Crimson
$236.00
Add to Cart

Miracle Cover Regular Strength

Miracle Cover Regular Strength

Quart

Normal Price: $19

Miracle Cover Regular Strength
$19.00
Add to Cart

Miracle Cover Regular Strength

Gallon

Normal Price: $55

Miracle Cover Regular Strength
$55.00
Add to Cart

Miracle Cover Regular Strength

5 Gallons

Normal Price: $265

Miracle Cover Regular Strength
$265.00
Add to Cart

Miracle Cover Regular Strength

55 Gallons

Normal Price: $2,300

Miracle Cover Regular Strength
$2,300.00
Add to Cart

Miracle Wood™ Stain


Redwood

8 Oz can
$19.99
Add to Cart
Quart
$62.00
Add to Cart
Gallon
$230.00
Add to Cart

Pine

8 Oz can
$19.99
Add to Cart
Quart
$66.00
Add to Cart
Gallon
$256.00
Add to Cart

Oak

8 Oz can
$19.99
Add to Cart
Quart
$66.00
Add to Cart
Gallon
$256.00
Add to Cart

Mahogany

8 Oz can
$17.99
Add to Cart
Quart
$62.00
Add to Cart
Gallon
$230.00
Add to Cart

Walnut

8 Oz can
$17.99
Add to Cart
Quart
$62.00
Add to Cart
Gallon
$230.00
Add to Cart

Cedar 

8 Oz can
$19.99
Add to Cart
Quart
$66.00
Add to Cart
Gallon
$230.00
Add to Cart

MIRACLE COVER GRAFFITI GUARD

MIRACLE COVER GRAFFITI GUARD
$38.00
Add to Cart
MIRACLE COVER GRAFFITI GUARD
$110.00
Add to Cart
MIRACLE COVER GRAFFITI GUARD
$480.00
Add to Cart
MIRACLE COVER GRAFFITI GUARD
$5,180.00
Add to Cart

Specialized in the Marine Industry

Now owners of boats/vessels can count on maximum protection against the damages by sea water, seaweed, moss, oil, salts, UV rays and more. This special formula contains double the silicone rubber and has the ability to super seal porous and non-porous surfaces, avoiding penetration of water, liquids, and oils while it allows the protected surfaces to breathe. Miracle Cover will save you costly charges of repairs and continual maintenance. It does not reapplication which is typical of other products that are seasonal. Two immediate applications will prolong the life and beauty of any surface.

MIRACLE COVER MARINE Does It All:

  • It is guaranteed to protect any porous surface up to 5 years.
  • It is an environmentally safe, non-toxic, water-based formula.
  • It is easy to apply with a brush, sprayer, or roller.
  • It is recommended and used by boat yards, marinas,
    boat manufactures, and owners.

MIRACLE COVER MARINE Protects:

Wood, Sails, Hull, Fiberglass, Metal, Leather, Boat Trailers, Counter tops, Rubber, Cables, Canvas, Cloth, Decks, Galley, Ropes, Buoys, Upholstery, Tile and Grout, Nylon, Carpets, Awnings, Covers, Inflatables and more.

MIRACLE COVER MARINE Performance:

MIRACLE COVER MARINE produces a clear penetrating film which does not discolor or degrade when exposed to ultraviolet radiation.

MIRACLE COVER MARINE provides maximum water repellency for any porous surface and helps protect them from salt spray and acid rain.

MIRACLE COVER MARINE can be mixed with paints and epoxy. When mixing with paints, the mixture is one cup of

MIRACLE COVER MARINE for every gallon of paint. When mixing with epoxy, the mixture is one quart of MIRACLE COVER MARINE for every gallon of epoxy.

CLEANING:

Utilizing conventional machinery or cleaning agent when necessary, dirt wax or foreign matter shall be thoroughly removed. All components shall be cleaned and, dry to ensure penetration adhesion of the sealer. Cleaning can be accomplished by many deferent methods such as sandblasting, water blast or other suitable method to clean the surface to receive the product. After cleaning the surface chemical wash the substrate.

Miracle Cover Marine will not harm glass, aluminum, wood, plastic, or fiberglass but protective care should be taken please cover all glass surfaces.

MIXING:

Drums or containers of sealer should be agitated prior to use in order to redisperse any solid materials that have settled during storage.


Miracle Cover Marine shall be used as supplied by the distributor without the adding of any solvents, catalyst, pigments or curing agents.

System application shall not commence outdoors during inclement weather or if a precipitation appears imminent. Substrate should be dry for proper penetration.

Temperature Requirements are that Miracle Cover Marine must be applied above 40F

It is always best to apply a small inconspicuous test patch to check for aesthetics and penetration. Apply the proper product concentration, regular for all surfaces above the water line and extra strength on surfaces below the water ling. Application can be accomplished with low pressure airless sprayer, brush or roller.


Above The Waterline: Two coats of Miracle Cover Marine Regular shall be applied to all boat surfaces above the water line. Allow the initial coat to cure for one half hour before applying a second coat. Allow the second coat to cure for not less than 24 hours to acquire proper substrate penetration. After the 24 hours the boat can be placed into the water. When mixed with paint add 1-cup per gallon of paint then cover the paint with one coat of Miracle Cover Marine Regular.

Below The Water line: On metal, or wood boat apply three coats of Miracle


Cover Marine Extra Strength in accordance to the following application instructions:

1. Apply three coats allowing 1/2 hours between coats.

2. The next day (afternoon) move pads and apply three coats on uncovered areas 1/2 hour between coats

3. Allow product to cure 48 hours before putting boat into water.

4. When mixing with paint add 1-cup to gallon of paint then apply 2­coats of Miracle Cover Marine Extra Strength over the paint.

On Fiberglass Boats with gel coat bottoms three coats of Miracle Cover Extra Strength is required and applied in accordance to the procedure indicated for wood and metal boats. For fiberglass boats or boats with epoxy bottoms the following procedure applies:

Four coats of Miracle Cover Marine Extra Strength will be required for long lasting protection.

Application: use an airless pressure sprayer utilizing a 66 tip or finer recommended.

Application Process: Numbers A & B below must be applied within a 24 hour period.

A) Day one (Afternoon): Apply two coats allowing 1/2 hour between coats.

B) Day two (morning): Apply two coats within 1/2 hour between coats.

C) Day three (afternoon): Move pads if required, apply 4 coats of product to uncooked areas leaving ½ hour between coats.

D) Drying time varies from two to four days. When dry product will feel rubbery but not sticky.

Vertical Surface Application should be applied with a six inch rundown. It may be applied either top to bottom or bottom to top. Miracle Cover Marine Regular and Extra Strength can be added to paints and some epoxy for extended life. Add one cup to each gallon of paint and one quart to the epoxy.

Upon the completion of all work the contractor/applicator shall remove all equipment, materials and debris leaving the area in undamaged and acceptable condition.

Contractor/applicator shall clean all applicators of product with flushing with water.

Miracle Cover Marine shall not be applied in interior applications where a thermal vapor barrier is required.

Equipment and methods used in the application of Miracle Cover Marine shall be in accordance with distributor instructions.

NOTE: Be Sure that the boat bottom is completely dry before returning to the water.

5-Year Warranty:

MIRACLE COVER INC.warrants this product to be free of defects in material and manufacturing for a period of five years from the date of purchase. In the event of a claim for warranty, MIRACLE COVER INC. will replace the product free of charge, including freight, or at its option, refund the purchaser the price paid as evidenced by the purchaser's receipt.

Miracle Concrete Color ™

Basic Use: Miracle Concrete Color is designed to be a decorative and protective ad-mixture for Miracle

Cover which will provide attractive colored finishes and extended UV protection to concrete.

Composition: Miracle Concrete Color is a specially formatted emulsion binder system which secures pigment and UV stabilizing additive on the exterior of the substrate.

Miracle Cover Super™

Basic Use: Miracle Cover Super is designed to be waterproof and vapor retardant membrane for a variety of surfaces including concrete (uncured) block, wood, and metal for a variety of applications including decks, walls (both above and below grade), and water retainment structures such as rain gutters and numerous other items. Miracle Cover Super is used in conjunction with mesh or mat material for repairing cracks, joints, and palled areas. It may also be utilized as a waterproofing adhesive for production/insulation board or tile and as a base coat for other water-based surface wearing products.


Composition: Miracle Cover Super is a medium viscosity, water-based, polymer-modified anionic biyuminous/asphalt emulsion, which exhibits exceptional bonding, elongation, and waterproofing characteristics.

Benefits:

  • Performs as a vapor and water barrier.
  • Non-hazardous, nontoxic, and nonflammable (VOC compliant).
  • Good tensile strength.
  • Excellent elongation and recovery.
  • Exceptional bonding.
  • Not affected ponded water.

Limitations:

  • Should be applied to clean and dry surfaces.
  • Adjacent areas and surfaces should be protected from contact with the product.
  • Product should be applied above 40° F.
  • A test area should always be done to verify compatibility of substrate with product.
  • Solvent-based products should not be applied over this product.
  • During warm weather application in 10 mil layers is recommended.
  • Miracle Cover Super should not be applied to cold tar and solvent based coatings.

Miracle Wood™ Stain

Basic Use: Miracle Wood Stain is designed to be a decorative and protective ad-mixture for Miracle Cover which will provide attractive colored finishes and extended UV protection to the substrate.


Composition: Miracle Wood Stain is a specially formatted emulsion binder system which secures pigment and UV stabilizing additive on the exterior of the substrate.

Benefits:

  • Tenhances the appearance of many substrates.
  • Provides decorative and protective solution to weathering.
  • Provides extremely durable coloring surfaces.
  • Has extensive breathe ability, allowing air to escape from substrate.
  • Provides excellent water-repelling characteristics for long term protection.
  • Has extended resistance to salts, chemicals, mildew, UV rays, and other liquids.

Limitations:

  • It should be applied to clean and dry surfaces for best results.
  • Adjacent surfaces should be protected from contact with the product.
  • Should not be applied when inclement weather appears imminent.
  • Should not be applied where vapor barrier is required.
  • A test area should always be done to verify compatibility of concrete with product.
  • Excess material should be brushed into the surface to prevent slipperiness.
  • Paint adhesion after application may be difficult unless paint contains silicone.
  • Care should be taken over substrates containing water soluble pigments.

MIRACLE COVER GRAFFITI GUARD

You will agree, one of the biggest problems facing most large cities is how to clean up the Graffiti that defaces many of their buildings and transportation systems.

We have come up with the solution it is “Graffiti Guard” No more:

  • Sandblasting
  • Repainting
  • Toxic Chemicals
  • Hard Labor

Your city can rid itself of the unsightly graffiti with minimum amount of effort in a cost effective way.


Coming Soon

See Safety Data Sheet